WR-6412

- EN54-24 certified for use in voice alarm systems
– Weather resistant, environmental performance to level IP56
– 12AV woofer with 3” voice coil
– M-75 1,5″ compression driver
– Rotatable 60º x 40º horn design
– Two exposure ratings: CX (covered exposure) and DX (direct exposure)

The WR-6412 employs a 12AV woofer for low frequency reproduction. A M-75 compression driver with 3″ titanium diaphragm attached to a 60º x 40º rotatable horn provides exceptional high frequency reproduction. The rugged birch plywood cabinet construction is available in black, white or military grey depending on the finish.

The WR-6412 offers two exposure ratings: CX (covered exposure) for applications where cabinets are covered or protected, and DX (direct exposure) where cabinets are unprotected and directly exposed to the environment. The CX versions are protected with a thick ISO-flex polyurea coating on the exterior surface. The DX versions augment the protection rating by employing a fiberglass exterior. Stainless steel fittings and mounting hardware are offered on both versions.

Nominal Power 300 W
On-axis Frequency Range (-10dB) 60 Hz - 20 kHz
Nominal Impedance 8 Ohms
Minimum Impedance 8.2 Ohms @ 135 Hz
On-axis Sensitivity 1w/4m 82.5 dB
Measured Maximum SPL at 4m 106.7 dB
Horizontal Coverage Angles (-6dB)
(500 Hz, 1 kHz, 2 kHz, 4 kHz)
135º, 92º, 70º, 65º
Vertical Coverage Angles (-6dB)
(500 Hz, 1 kHz, 2 kHz, 4 kHz)
144º, 122º, 57º, 42º
Enclosure Material Birch Plywood
Colour/Finish CX: Black/ISO-flex
DX: Military Grey or Black/Fiberglass
Transducers/Replacement Parts LF: 12AV/GM 12P
HF: M-75/GM M-75
Environmental Type Type B
Environmental Performance EN 60529 IP56
Connector Unterminated cable
Dimensions (H x W x D) 70 x 39 x 39 cm
27.6 x 10.4 x 10.4 in
Net Weight 24 kg (52.8 lb)
Optional Accessories AXU-WR6412
Nominal Power based on a 100 h test using a 6dB crest factor pink noise signal filtered according to the IEC 60268-1:1985 norm and band-pass filtered with Butterworth 24dB/Oct filters from 89 Hz to 11,2 kHz.

Sensitivity and Max SPL measured using a 6 dB crest factor pink noise, averaged from 100 Hz to 10 kHz in 1/3 Octave bands.

Coverage measured from 500 Hz to 4 kHz in Octave bands.

Measured SPL obtained by integration over a period of at least 30 s.

Declaration of Performance WR8826/WR6412/WR6415/Aero-12

PDF, 431 KB

WR-6412 2D Drawing

111 KB

Photo WR-6412

High Resolution, 760 Kb

WR Systems User manual

English, 1.85 MB

AXU-WR6412 User Manual

PDF, 594 KB

GLL data for WR Series

Data files for Ease V4.3. 446 KB

WR-6412 Spec Sheet

English, 537 KB